Prior to this commit, Spring Boot auto-configurations for GraphQL web
endpoint were implementing their own `RequestPredicate` instances for
HTTP endpoints. Those were composing predicates with the provided DSL.
While this is functionnally right, Spring for GraphQL now provides
predicates in order to:
* host the implementation in spring-graphql directly
* provide optimized predicates for faster matching and lower overhead
This commit switches the auto-configurations to using these new
predicates.
Closes gh-39652
This commit adapts the error controller tests that need the request
to fail with a bind issue, and simulate the behavior of
ModelAttributeMethodProcessor.
As of Spring Framework 6.0.x, this processor no longer throws a
BindingException, but rather a MethodArgumentNotValidException and
the handing of BindException itself is deprecated.
This makes sure that those tests can smoothly be executed against
Spring Framework 6.2.x as throwing a BindingException now results
into an unresolved exception, and an internal server error rather than
the expected bad request.
See gh-39767
This commit moves the resolution check for ConnectionDetailsFactory
to a dedicated method to make it more clear that it is meant to verify
that the implementation is resolved and can be loaded from the
classpath.
The previous algorithm relied on a behavior of ResolvableType that only
resolves the first level generics. Further improvements in Spring
Framework 6.2 make this check invalid as some implementations use a
Container that can hold a nested generic.
See gh-39737
Add a new property called 'mime-mappings' under the 'server' property.
This is a key-value-map, which is added to the default MimeMappings.
See gh-39430
Add the new property nameIdFormat to the Saml2RelyingPartyProperties and
the corresponding mapping to the
Saml2RelyingPartyRegistrationConfiguration.
See gh-39395
This commit removes the use of the Pulsar ObjectMapperFactory when
converting the authentication config props map to a JSON string. The
Pulsar factory operates on a shaded returned value of Jackson
ObjectMapper which may not exist when users are using the
non-shaded version of the Pulsar client lib.
See https://github.com/spring-projects/spring-pulsar/issues/562
See gh-39389
Introduce an jOOQ `ExecuteListener` sub-interface specifically
for exception translation with the auto-configured
`DefaultExecuteListenerProvider` instance.
Users can now define a bean that implements the interface or
omit it and continue to use the existing exception translation
logic.
See gh-38762
Prior to this commit, the GraphQL auto-configuration would consider many
bean types like `DataFetcherExceptionResolver` and
`SubscriptionExceptionResolver` to configure the `GraphQlSource`.
It would also configure a default `ConnectionTypeDefinitionConfigurer`.
This commit will detect all `TypeDefinitionConfigurer` beans defined in
the application and configure them in addition to the
`ConnectionTypeDefinitionConfigurer`.
Closes gh-39118
The JwtConverter bean is only supplied, if one of the following
properties is there:
* spring.security.oauth2.resourceserver.jwt.authority-prefix
* spring.security.oauth2.resourceserver.jwt.principal-claim-name
* spring.security.oauth2.resourceserver.jwt.authorities-claim-name
See gh-38105
Update `AutoConfigurationSorter` so that `getClassesRequestedAfter()`
results are sorted to match the earlier name/order sorting. Prior to
this commit the order of items added via `@AutoConfigureAfter` was in
an undetermined order which could cause very subtle `@ConditionalOnBean`
bugs.
Thanks very much to Alexandre Baron for their help in diagnosing and
reproducing this issue.
Fixes gh-38904
Update `PulsarPropertiesMapper` to use JSON encoded parameters rather
than a `Map` since the `Map` method is deprecated in Pulsar. This
commit simply takes the auth params map and converts them to the
expected encoded JSON string of auth parameters.
See gh-38839
Update `LoadedPemSslStore` so that it loads content lazily. This
restores the behavior of Spring Boot 3.1 and allows bundles to be
defined with files that don't exist as long as they are never accessed.
Fixes gh-38659
There are some notable differences in the behavior of Spring
Security's reactive and servlet-based web security. Notably,
Servlet-based web security (`@EnableWebSecurity`) works without
any authentication manager, rejecting requests as not authorized.
By contrast reactive-based web security (`@EnableWebFluxSecurity`)
fails to start up when there's no authentication manager, either
provided directly as a bean or derived from a
ReactiveUserDetailsService. There are also further differences at
runtime where empty Monos from all ReactiveAuthenticationManagers
results in an internal error and a 500 response whereas a similar
situation in the servlet implementation results in a 401.
Previously, to accommodate these differences in behavior, Spring
Boot's auto-configuration would behave differently. In the Servlet
case, web security would be enabled whenever the necessary
dependencies were on the classpath. In the reactive case, web
security would back off in the absence of an authentication manager
to prevent a start up failure. While this difference is rooted in
Spring Security, it is undesirable and something that we want to
avoid Spring Boot users being exposed to where possible.
Unfortunately, the situation is more likely to occur than before
as ReactiveUserDetailsServiceAutoConfiguration now backs off more
readily (gh-35338). This makes it more likely that the context will
contain neither a reactive authetication manager not a reactive
user details service.
This commit reworks the auto-configurations related to reactive
security. ReactiveSecurityAutoConfiguration will now auto-configure
an "empty" reactive authentication manager that denies access through
Mono.error in the absence of a ReactiveAuthenticationManager,
ReactiveUserDetailsService, or SecurityWebFilterChain. The last of
these is to allow for the situation where a filter chain has been
defined with an authentication manager configured directly on it.
This configuration of an authentication manager allows
`@EnableWebFluxSecurity` to be auto-configured more readily,
removing one of the differences between reactive- and Servlet-based
security.
Corresponding updates to the auto-configurations for reactive OAuth2
support have also been made. They no longer try to auto-configure
`@EnableWebFluxSecurity`, relying instead upon
ReactiveSecurityAutoConfiguration, which they are ordered before, to
do that instead.
Closes gh-38713
The stream auto-configuration is tested in RabbitStreamConfigurationTests,
and excluding it prevents the creation of the "rabbitStreamEnvironment"
Environment bean, which delays the application context close by 1 second
because it has to wait for some Netty resources to gracefully shut down.
Closes gh-38750
Following the changes in gh-37504, the reactive resource server
auto-configuration could enable WebFlux security in situations where
it was otherwise in active. This could then result in an application
failing to start as no authentication manager is available.
This commit updates the configurations that enable WebFlux security
so that they fully back off unless their related configurations are
active. Previously, only the configuration of the
SecurityWebFilterChain would back off. This has been expanded to
cover `@EnableWebFluxSecurity` as well. This has required splitting
the configuration classes up so that the condition evaluation order
can be controlled more precisely. We need to ensure that the JWT
decoder bean or the opaque token introspector bean has been defined
before evaluation of the conditions for `@EnableWebFluxSecurity`.
Without this control, the import through `@EnableWebFluxSecurity` in
one location where the conditions do not matchcan prevent a
successful import in another where they do.
Fixes gh-38713
Prior to this commit, we set in gh-37388 the ObservationRegistry on the
auto-configured JmsTemplate bean. This enables observations and context
propagation when sending JMS messages.
This commit applies the same to the `DefaultJmsListenerContainerFactory`
and the `DefaultJmsListenerContainerFactoryConfigurer`, in order to
enable observations on `@JmsListener` annotated methods.
This commit also refactors the support implemented in gh-37388 to avoid
relying on a bean post processor and instead set the observation
registry directly in the main auto-configuration: while Micrometer core
is an actuator-only dependency, Micrometer Observation API is a compile
dependnecy for spring-jms itself and there is no need to separate
concerns there.
Fixes gh-38613
Prior to this commit, some properties in the `spring.webflux.multipart`
namespace were ignored for the streaming use case because those were not
supported in streaming mode with `PartEvent`.
As of Spring Framework 6.1, the `max-parts` and
`max-disk-usage-per-part` properties can be supported and this commit
maps those properties accordingly.
Fixes gh-37642
Update `LiquibaseProperties` and `LiquibaseAutoConfiguration` to
support the recently added `setShowSummary` and
`setShowSummaryOutput` methods.
See gh-38274
Rename `KeyVerifier` to `CertificateMatcher` and refactor some
of the internals. This commit also adds test helper classes to
help simplify some of the tests.
See gh-38173
Move `KeyVerifier` to spring-boot-autoconfigure to reduce the
public API required in `PemSslStoreBundle`.
This commit also moves the verify property so that is can be set
per store.
Closes gh-38173
Both `EnumFeature` and `JsonNodeFeature` implement `DataTypeFeature`
which was recently added in Spring Framework. This commits introduces
support to allow the configuration via properties.
See spring-projects/spring-framework#31380
See gh-37885
Prior to this commit, the GraphQL WebSocket HandlerMapping bean would be
ordered at position "2", before the RouterFunction variant defined by
Spring Framework at position "3".
Since then, the Spring Framework team changed the default order value
for this one at "-1", see spring-projects/spring-framework#30278.
This prevents the WebSocket upgrade, as the request is handled by the
RouterFunction instead of the WebSocket handler.
This commit updates the handlermapping order and introduces a test to
prevent issues in the future.
Fixes gh-37892
Prior to this commit, `spring.jms.listener.session.acknowledge-mode`
and `spring.jms.template.session.acknowledge-mode` accepted only a
predefined set of values representing standard JMS acknowledge modes.
This commit adds support for also using arbitrary integer values to
these configuration properties, which allows vendor-specific JMS
acknowledge modes to be configured.
See gh-37576
Update `JdbcClientAutoConfigurationTests` to use a type safe query
since Spring Framework now returns `Object` types when no type is
specified (see Spring Framework issue 31403).
See gh-37710
