This commit adds the `@GraphQlTest` annotation which brings a new type
of sliced test for GraphQL applications. This considers all the required
infrastructure brought by `@AutoConfigureGraphQl`, but also brings
application components like `@Controller` beans and
`RuntimeWiringConfigurer`.
With this type of test, we'll only initialize a minimal setup for
testing a set of Controllers, without involving any transport-related
component.
See gh-29140
This commit adds the required infrastructure to auto-configure a
`GraphQlTester` or `WebGraphQlTester` in Spring Boot tests.
Specific annotations like `AutoConfigureGraphQlTester` and
`AutoConfigureWebGraphQlTester` will contribute pre-configured beans for
testing a GraphQL with the tester.
This also ships a `ContextCustomize` for contributing a `GraphQlTester`
in the case of a full `@SpringBootTest` integration test against a live
server.
See gh-29140
This commit adds the `@AutoConfigureGraphQl` test annotation. It can be
used to import the relevant auto-configurations when testing a GraphQL
application.
Currently, it will get the main `GraphQlAutoConfiguration`, but also
what's required for configuring codecs and validation support.
See gh-29140
This commit makes it clearer that, when using
@AutoConfigureTestEntityManager outside of @DataJpaTest, any tests using
the test entity manager must be @Transactional.
See gh-28086
As of Spring Framework 5.3, `WebTestClient` can now be configured on top
of `MockMvc` for testing Spring MVC applications in a mock environment.
Prior to this commit, `WebTestClient` would be already configured for
WebFlux mock setups with `@AutoConfigureWebTestClient` or live servers
(for both MVC and WebFlux apps).
This commit enhances the `@AutoConfigureWebMvc` support so that a
`WebTestClient` instance is auto-configured if the spring-webflux
dependency is present on the classpath.
Closes gh-23067
Previously DataRedisTest-annotated test could not use reactive
operations as RedisReactiveAutoConfiguration is not considered. This
commit includes this auto-configuration and adds a test to exercise this
scenario.
Closes gh-26319
This commit changes the default value of bootstrap-mode to "default"
rather than "deferred" so that the JPA infrastructure starts in the
main thread rather than asynchronously.
Closes gh-24249
Previously, when an embedded test database was being auto-configured
any schema username and password specified by the user would result
in a separate embedded test database being created to load the schema.
This then left the actual test database without the schema causing
test failures.
This commit updates the test database auto-configuration to set the
schema username to an empty string in a property source that's added
first to the environment's property sources. This causes any schema
username configured by the user to be ignored, preventing the creation
of a separate database for schema.sql processing.
Fixes gh-19321
Update `AnnotationsPropertySource` so that nested annotations are
supported. Prior to this commit, annotations annotated with
`@PropertyMapping` that contained nested annotation attributes would
result in instances of `TypeMappedAnnotation` being used as properties.
This usually led to errors due to not being able to convert those to
Strings. This commit makes it so that nested annotations are recursively
mapped to properties. This should allow for more complex configuration
to be mapped from annotations.
See gh-23146
Prior to this commit, tests using the `@WebMvcTest` annotation would not
include the `HttpEncodingAutoConfiguration`. This means that, even if
configured, the encoding filter would not be configured in MVC tests,
resulting in an inconsistency with `@SpringBootTest` tests.
This commit ensures that the `HttpEncodingAutoConfiguration` is included
when `@WebMvcTest` is used.
Fixes gh-23749
This commit adapts the auto-configuration for the new core r2dbc support
in Spring Framework and provides auto-configuration for
R2dbcEntityOperations.
Closes gh-22708
This commit introduces a new property to globally disable metrics
export. In integration tests, this property is automatically set to
disable everything but in-memory metrics.
This commit also introduces a `@AutoConfigureMetrics` annotation that
can be used for integration tests that require metrics export to operate
as they would in an application.
See gh-21658
Previously, Spring Boot's modules published Gradle Module Metadata
(GMM) the declared a platform dependency on spring-boot-dependencies.
This provided versions for each module's own dependencies but also had
they unwanted side-effect of pulling in spring-boot-dependencies
constraints which would influence the version of other dependencies
declared in the same configuration. This was undesirable as users
should be able to opt in to this level of dependency management, either
by using the dependency management plugin or by using Gradle's built-in
support via a platform dependency on spring-boot-dependencies.
This commit reworks how Spring Boot's build uses
spring-boot-dependencies and spring-boot-parent to provide its own
dependency management. Configurations that aren't seen by consumers are
configured to extend a dependencyManagement configuration that has an
enforced platform dependency on spring-boot-parent. This enforces
spring-boot-parent's version constraints on Spring Boot's build without
making them visible to consumers. To ensure that the versions that
Spring Boot has been built against are visible to consumers, the
Maven publication that produces pom files and GMM for the published
modules is configured to use the resolved versions from the module's
runtime classpath.
Fixes gh-21911
Previously, AutoConfigureMockMvc used Spring Security's default filter
ordering, ignoring the value configured by SecurityProperties that is
used at runtime. This resulted in different ordering at runtime and in
tests.
This commit updates the configuration for AutoConfigureMockMvc to
import the Spring Security filter auto-configuration, thereby ensuring
that the ordering configured via SecurityProperties is applied.
Fixes gh-21801
This commit adds a test slice for Spring Data R2DBC. When
`DataR2dbcTest` is added on a test, only Spring Data R2DBC repositories
and the infrastructure that they need is auto-configured.
Contrary to the JDBC counterpart, the `ConnectionFactory` is not swapped
by an embedded database.
See gh-19988
Co-authored-by: Mark Paluch <mpaluch@pivotal.io>
Update all dependencies declarations to use the form `scope(reference)`
rather than `scope reference`.
Prior to this commit we declared dependencies without parentheses unless
we were forced to add them due to an `exclude`.
Replace Gradle single quote strings with the double quote form
whenever possible. The change helps to being consistency to the
dependencies section where mostly single quotes were used, but
occasionally double quotes were required due to `${}` references.
Change the default `BootstrapMode` for auto-configured `JpaRepositories`
to `BootstrapMode.DEFERRED` to allow the initialization of
`EntityManagerFactory` to be parallelized for increased startup efficiency.
Prior to this change, the default BootstrapMode for all auto-configured
Spring Data repositories was `BootstrapMode.DEFAULT`.
Closes gh-16230
This paves the way for publishing Gradle module metadata once the
problem caused by snapshot versions and our two-step publication
process has been addressed.
See gh-19609
This reverts commit b34a311d02 as,
having disabled the publishing of Gradle's module metadata (4f75ab5),
the changes are no longer needed.
See gh-19609
Previously, enforcedPlatform dependencies were using to pull in the
constraints defined in spring-boot-dependencies and
spring-boot-parent and applied them strictly so that the constrained
version had to be used. This worked as intended in Spring Boot's own
build but incorrectly enforced those same strict version requirements
on external consumers of Spring Boot's modules.
This commit reworks how Spring Boot defines its internal dependency
management so that platform dependencies are exposed to external
consumers while enforced platform dependencies are using internally.
See gh-19609
In 2.2.0, @ConfigurationPropertiesScan was enabled by default.
Unfortunately, this had the unexpected side-effect of breaking
conditional enablement of a @ConfigurationProperties class via
@EnableConfigurationProperties if the @ConfigurationProperties class
was in a package covered by scanning.
This commit remove @ConfigurationPropertiesScan from
@SpringBootApplication so that it is no longer enabled by default.
2.1.x users who rely upon such conditional enablement of
@ConfigurationProperties classes can now upgrade to 2.2.x without
having to make any changes. Users who do not have such a need and are
in a position to use configuration properties scanning can now opt-in
by adding @ConfigurationPropertiesScan to their main application class
alongside @SpringBootApplication.
Closes gh-18674
Previously, all of the type exclude filters in
spring-boot-test-autoconfigure were package-private. This prevent a
user who was creating their own test slice from composing their own
TypeExcludeFilter with one of Boot's.
This commit updates all of the TypeExcludeFilters in the
test-autoconfigure module to make them public. The intention is only
to allow them to be composed with other type exclude filters when
referenced in a @TypeExcludeFilters annotation. Therefore, each
filter class is declared final and their constructors remain
package-private.
Closes gh-18746
Previously, Maven's default behaviour was relied up which resulted
in the artifact ID being appended to each URL as it was inherited.
This behaviour can only be disabled in Maven 3.6 and later, a version
that we cannot use due to an incompatibility with the Flatten Plugin.
This commit works around Maven's default behaviour by defining
properties for the SCM URL, connection, and developer connection and
then explicitly defining the settings in each pom using these
properties. The explicit definition of the properties in each pom
prevents them being inherited from the parent, thereby disabling the
unwanted appending of the artifact ID to the URL.
Fixes gh-18328
Update `@ConfigurationProperties` constructor binding support to only
apply when a `@ConstructorBinding` annotation is present on either the
type or the specific constructor to use.
Prior to this commit we didn't have a good way to tell when constructor
binding should be used vs regular autowiring.
For convenience, an `@ImmutableConfigurationProperties` meta-annotation
has also been added which is composed of `@ConfigurationProperties` and
`@ConstructorBinding`.
Closes gh-18469
Previously, the deferred line writing that is used, to print MockMvc
results to the console assumed that each DeferredLinesWriter would
only be used by a single thread at a time. This assumption does not
hold true when using JUnit 5's parallel test exection if the tests
running in parallel share an application context. This resulted in
a concurrent modification exception if one thread was adding lines
to the output while another was iterating over them.
This commit updates DeferredLinesWriter so that it uses thread local
storage for the deferred lines. This ensures that each List of lines
is only ever accessed by a single thread.
Closes gh-16179
Previously, DeferredLinesWriter would collect MockMvc output from
every test that has executed. If a test eventually failed, the
output from every test up to including the one that had failed would
be output, rather than just the output for the test that has just
failed.
This commit clears the deferred lines after each test, thereby
ensuring that when a failure occurs only the lines from the failing
test are output.
Fixes gh-17551
This commit updates ConfigurationPropertiesScanRegistrar to apply the
same component scan filters than the ones applied on standard classpath
scanning.
As a result, configuration properties scanning is automatically disabled
in slice tests and can be included by an explicit import or a dedicated
TypeFilter implementation if necessary.
Closes gh-16659
Meta-annotate `ClassPathExclusions` and `ClassPathOverrides` with
so that the `ModifiedClassPathExtension` no longer needs to be
used directly.
See gh-17491
Replace any direct `junit-platform-launcher` dependencies and instead
rely on the test runner providing it. Launcher related class are not
handled via reflection.
This update allows us to workaround SUREFIRE-1679.
Closes gh-17517
Apply checkstyle rule to ensure that private and package private
classes do not have unnecessary public methods. Test classes have
also been unified as much as possible to use default scoped
inner-classes.
Closes gh-7316
