This commit adds the Spring for GraphQL auto-configuration back
into Spring Boot 3.0, now that a 1.1.0 release is scheduled with the
required baseline. This release also needs GraphQL Java 19.0 as a
baseline.
Closes gh-31809
Spring Security now filters every dispatch by default and not only
once-per-request. Security configuration has been updated in a number of
places to restore the old behavior as needed for the tests to pass.
gh-31703 has been opened to review this and to investigate if we can
now remove the error page security filter and rely on the filtering of
every dispatch instead.
In addition to switching to once-per-request filtering where needed,
this commit also restructures the configuration of the error page
security filter. The restructuring was necessary to ensure that the
privilege evaluator bean has been defined before the conditions on the
error page security filter are evaluated. Without the change, the filter
was no longer being configured as the privilege evaluator hadn't been
defined before the on bean condition was evaluated. We may want to back
port this change as the ordering doesn't appear to have been defined
before and we were just getting lucky.
See gh-31622
See spring-projects/spring-security#11466
This commit makes the following potentially breaking changes:
- Dependency management for modules that do not exist in Hibernate
6.1 has been removed.
- Hibernate's modules are now in the org.hibernate.orm group. Users
not using the starter or using modules that are not in the starter
will have to update their build configuration accordingly.
- spring.jpa.hibernate.use-new-id-generator-mappings has been removed
as Hibernate no longer supports switching back to the old ID
generator mappings.
Co-authored-by: Andy Wilkinson <wilkinsona@vmware.com>
Closes gh-31674
Update `CompositeHandlerExceptionResolver` to search for beans in
all contexts. Note that `BeanFactoryUtils.beansOfTypeIncludingAncestors`
cannot not be used since we need to pick up all beans, even if they
have the same name.
See gh-31495
This commit updates several smoke tests in order to avoid conflicts
with NAME environment variable that is present in WSL and causes
project build to fail. Previous attempt to fix this in 7da42d71 was
incomplete.
See gh-31267
spring.security.saml2.relyingparty.registration.*.asserting-party.* is
now named spring.security.saml2.relyingparty.registration.*.assertingparty.*
Closes gh-30785
Rename spring.security.saml2.relyingparty.registration.*.identity-provider.*
to spring.security.saml2.relyingparty.registration.*.asserting-party.*
The old property names are still supported, but will lead to a warning
in the logs.
Closes gh-30642
This commit temporarily disables the Redis Session smoke test, as it
relies on the Session Actuator endpoint being present.
Since spring-projects/spring-session#1711, the default session
repository contributed is not of type `FindByIndexNameSessionRepository`
and thus cannot support the Session endpoint use case.
Until gh-30673 is resolved, this test is disabled.
See gh-30673
Previously, if spring.main.web-application-type was configured in
application.properties to servlet or reactive, setting
webEnvironment=NONE on @SpringBootTest would not work correctly and
a servlet or reactive web application context would be created
based on the value of spring.main.web-application-type.
This commit updates the test context bootstapper to set
spring.main.web-application-type to none when webEnvironment has been
set to none. This is done in the merged context configuration's
property source properties which are applied to the environment in a
high-precedence test property source that will override configuration
in application.properties.
Closes gh-29695
This commit switches to 1.0.0-SNAPSHOT for Spring GraphQL, before its
upcoming 1.0.0-M6 version.
This commit adapts to the changes introduced in
spring-projects/spring-graphql#317 : now that `GraphQlClient` has been
introduced, `GraphQlTester` has been aligned with the new
infrastructure. The `@GraphQlTest` and `@SpringBootTest` testing support
is now using different variants for each.
All samples have been updated to use the proper GraphQL terminology, see
and spring-projects/spring-graphql#310 .
See gh-29637
Due to gh-29695, smoketest.profile.ActiveProfilesTests starts a web
server bound to the default port (8080) despite the test setting
`webEnvironment` to `NONE`.
This commit works around the problem by running the tests with
server.port set to zero.
Closes gh-30086
ContextHandler.ApproveAliases has been deprecated. We tried to
replace it with AllowedResourceAliasChecker but it does not
behave in the same way and causes CI failures on Windows.
ContextHandler.ApproveAliases always returns true so we should
hardcode our own implementation that does the same.
Closes gh-30045
H2 2.x contains several important changes such as moving the primary key
generation mechanism to a sequence-based identifier. This commit fixes
a number of tests that were failing.
Closes gh-29651
Co-authored-by: Andy Wilkinson <wilkinsona@vmware.com>
Previously, the error page security filter passed the request's URI
to the privilege evaluator. This was incorrect in applications with
a custom context path as the privilege evaluator must be passed a
path that does not include the context path and the request URI
includes the context path.
This commit updates the filter to use UrlPathHelper's
pathWithinApplication instead. The path within the application does
not include the context path. In addition, pathWithinAppliation
also correctly handles applications configured with a servlet
mapping other than the default of /.
Closes gh-29299
Co-Authored-By: Andy Wilkinson <wilkinsona@vmware.com>
Update `SpringBootContextLoader` so that when possible the
`SpringApplication` remains in control of creating the `Environment`
instance.
Prior to this commit, we would always create the `Environment` in the
`SpringBootContextLoader` and then call `setEnvironment` on the
`SpringApplication`. This meant that the `ApplicationEnvironment`
classes were not used and that `isCustomEnvironment` was set to `true`
so no conversion was applied.
With the updated code, an `ApplicationListener` is used to mutate the
`Environment` instance and add the required test property sources.
Fixes gh-29169
Refine the logic introduced in 64270eca to use a side-effect free
Environment implementation rather than converting the Environment early.
Early conversion can cause condition evaluation issues if
`src/test/resources/application.properties` files are bound to the
`SpringApplication`. Specifically the `spring.main.web-application-type`
property can change the `Environment` type which must happen before
conditions are evaluated.
Fixes gh-29169
Prior to this commit, the `ErrorPageSecurityFilter` verified if
access to the error page was allowed by invoking the
`WebInvocationPrivilegeEvaluator` with the Authentication from the
`SecurityContextHolder`.
This meant that access to the error page was denied for a `null` Authentication
or `AnonymousAuthenticationToken` in cases where the error page required
authenticated access. This prevented authorized users from accessing the
error page in case the Authentication wasn't retrievable for the error dispatch,
which is the case for `@Transient` authentication or stateless session policy.
This commit updates the `ErrorPageSecurityFilter` to check access to the error page
only if the error is an authn or authz error in cases where an authentication object
is not found in the SecurityContextHolder. This makes the error response consistent
when bad credentials or no credentials are used while also allowing access to previously
authorized users.
Fixes gh-28953
This commit aligns `SpringBootTest`s to also use `ApplicationEnvironment`
instead of `StandardEnvironment`. This prevents the side-effect of active
profiles from `@ActiveProfiles` from being added to the environment when
doGetActiveProfiles is called. In this case, calling `addActiveProfiles()`
in the environment post processor would result in `@ActiveProfiles` being
added to the environment first, resulting in the wrong order.
The additional call to `setActiveProfiles()` is also not necessary when using
ApplicationEnvironment because that call was put in place to prevent the side-effect
which `ApplicationEnvironment` does not have.
Fixes gh-28530
There are dedicated smoke tests for Hazelcast, MongoDB and Redis
that run on CI.
This commit also polishes some of the other smoke tests related to
Spring Session
Change the order of `DataSourceScriptDatabaseInitializerDetector` so
that it always runs last. This update allows script initialization to
be combined with a high-level migration tool such as Flyway.
Closes gh-26692
This commit reworks the initial proposal so that jobs and triggers are
treated as first class concepts.
`/actuator/quartz` now returns the group names for jobs and triggers.
`actuator/quartz/jobs` returns the job names, keyed by the available
group names, while `/actuator/quartz/triggers` does the same for
triggers.
`/actuator/jobs/{groupName}` provides an overview of a job group. It
provides a map of job names with the class name of the job.
implementation
`/actuator/triggers/{groupName}` provides an overview of a trigger
group. There are five supported trigger implementations: cron, simple,
daily time interval, calendar interval, and custom for any other
implementation. Given that each implementation has specific settings,
triggers are split in five objects.
`/actuator/jobs/{groupName}/{jobName}` provides the full details of a
particular job. This includes a sanitized data map and a list of
triggers ordered by next fire time.
`/actuator/triggers/{groupName}/{triggerName}` provides the full details
of a particular trigger. This includes the state, its type, and a
dedicate object containing implementation-specific settings.
See gh-10364
Deprecate the `Bootstrapper` interface entirely and provide a
`BootstrapRegistryInitializer` alternative so that people can migrate.
Unfortunately our previous attempt to fix the typo in the `Bootstrapper`
interface didn't provide us a way to remove the deprecated method
without impacting users. It was also problematic for people who were
implementing `Bootstrapper` rather than using a lambda since they needed
to introduce the deprecated method.
We unfortunately can't see a way to fix the original typo without
introducing a new interface.
Fixes gh-25735
userDefinedMappingsSecureByDefault in
SampleSessionWebFluxApplicationTests may fail with an NPE if the
session times out before the initial response is sent due to the absence
of a SESSION cookie in the response. The test uses a short session
timeout (2 seconds) and we've seen the problem occur on CI when,
presumably, a noisy neighbour has caused some CPU starvation.
This commit increases the timeout to 5 seconds to reduce the chance of
a short period of CPU starvation causing the test to fail.
Closes gh-25572
Previously, actuator endpoints were registered with Jersey upon
injection of the ResourceConfig bean into a registrar class rather than
using a ResourceConfigCustomizer. This was done to fix a problem
when running the Actuator on a separate port where the main application
context's customizers were also applied to the management context,
breaking the singleton contract for those resources. This approach
meant that the registration could be performed at any point after the
ResourceConfig had been created. When Jersey's configured as a Filter
this resulted in the registration failing as the attempt was being made
after the Filter lifecyle callbacks which make the ResourceConfig
immutable.
This commit reworks the endpoint registration to be performed using a
ManagementContextResourceConfigCustomizer, a resource config customizer
that's only applied to the ResourceConfig that's used by the Actuator.
When there's a separate management context, this ResourceConfig is
created by the Actuator's auto-configuration and the management context
resource config customizers are applied to it during its creation. The
main application's customizers are not applied. When the actuator is
using the same context as the main application, this ResourceConfig is
created by the main application. In this case a
ResourceConfigCustomizer is defined that delegates to all
ManagementContextResourceConfigCustomizers, allowing them to register
the actuator endpoints with the main ResourceConfig.
Fixes gh-25262
